Canada job trends-Mechanical engineer

Canada Job Trend Analysis Mechanical Engineer1

 

Mechanical engineers that are qualified and experienced are in high demand in Canada. Mechanical engineers are in demand in the aerospace, robotics, process automation, and environmental standards industries.

Mechanical engineers work on the study, design, and development of heating, ventilation, and air conditioning gear and systems. They work in the energy sector, as well as transportation, processing, and manufacturing. They work on mechanical systems’ evaluation, installation, operation, and maintenance.

How much does a mechanical engineer earn in Canada?

The median wage for this profession is approximately 40 dollars per hour and the maximum wages for this profession is in the Canadian province of Alberta where it is 56.41 dollars per hour.

Community/Area Wages ($/hour)
Low Median High
Canada 26.00 40.00 62.50
Alberta 34.00 56.41 72.50
British Columbia 27.18 36.06 57.44
Manitoba 25.48 34.62 61.00
New Brunswick 29.06 40.87 55.29
Newfoundland and Labrador 16.50 46.15 81.73
Northwest Territories N/A N/A N/A
Nova Scotia 24.64 40.87 69.74
Nunavut N/A N/A N/A
Ontario 24.04 38.46 58.24
Prince Edward Island 20.15 30.00 53.33
Quebec 26.50 38.79 57.69
Saskatchewan 27.88 37.50 58.00

How to immigrate to Canada as a mechanical engineer?

Mechanical engineer is an eligible occupation under Canada’s FSWP. They can get a PR visa through Express Entry or Provincial Nominee Program. The first step in the process to migrate to Canada is to calculate your eligibility for your PR visa.

Check your eligibility

Here are some of the PNP streams open to mechanical engineers in Canada:

PNP Streams Open to Mechanical Engineering

PNP Name of stream
 

Alberta

Alberta Opportunity Stream

NOC 0211 – Engineering Managers

NOC 2131 – Mechanical Engineering Technicians

Alberta Express Entry Stream

 

British Columbia

BC PNP Tech Pilot Program

NOC 2132 – Mechanical Engineers

Express Entry British Columbia

 

Ontario

Ontario Express Entry

Human Capital Priorities Stream

In-Demand Skills Stream

 

Manitoba

Skilled Workers in Manitoba

NOC 0211 – Engineering Managers

NOC 2132 – Mechanical Engineers

NOC 2141 – Industrial & Manufacturing Engineers

Skilled Worker Overseas

New Brunswick Express Entry Labour Market Stream

Skilled Workers with Employer Support

 

Newfoundland

& Labrador

Newfoundland & Labrador Express Entry Skilled Worker

Skilled Worker Category

 

Nova Scotia

Nova Scotia Demand: Express Entry

Nova Scotia Express Entry Labour Market Priorities

Skilled Worker Stream

(Skilled Workers Pathway)

 

Northwest Territories

Northwest Territories Express Entry Stream

Skilled Worker Stream

Critical Impact Worker Stream

 

Saskatchewan

International Skilled Worker: Employment Offer

International Skilled Worker:

Occupations In-Demand

International Skilled Worker:

Saskatchewan Express Entry

 

Prince Edward Island

PEI PNP Express Entry

Skilled Worker Stream

Critical Worker Stream

 

Yukon

Yukon Express Entry (YEE)

Skilled Worker

Critical Impact Worker

You won’t need a job offer if you use the Canadian Express Entry route; instead, you’ll fill out an expression of interest in a province, and if they like you, they’ll give you a provincial nomination. You can become a permanent resident in as little as 6 months if you go this method. However, competition is stiff, and each month, only a limited number of talented foreign workers are invited to apply for permanent residency. This would be the first best option if you meet the program’s prerequisites.

If you get a job offer from an engineering firm in Canada, you can apply for your provincial nomination directly to the provincial government where you will be working. This option will necessitate a bit more effort on your part, but you could arrive in Canada with a job and have the permanent residency process in underway in even less time.

Applicants will have to get their mechanical engineering skills and their experience and qualifications assessed by the relevant assessment body which will serve two purposes. First and foremost, a positive skills evaluation will assist you in claiming the required points on both the Express Entry CRS and the Federal Skilled Trades application. Second, your positive skills evaluation will also serve as your Canada Equivalent Qualification, which will be used for your professional registrations.

Skills required

  • Analytical skills include:
    • Ability to analyze information
    • Planning skills
    • Inspection and testing skills
    • Research and investigation skills
  • Engineering and Technology skills include:
    • Design skills
    • Engineering skills
    • Applied technologies skills
    • Mechanics and Machinery skills
    • Operating and Repairing Equipment skills
    • Mechanical installation, maintenance and repair skills
  • Management skills include:
    • Co-ordination and Organization skills
    • Supervision skills

3-year job prospect-The job prospect in the next three years for mechanical engineers is fair in most provinces of Canada.

Location Job prospects
Alberta Fair
British Columbia Fair
Manitoba Good
New Brunswick Good
Newfoundland and Labrador Fair
Northwest Territories Undetermined
Nova Scotia Fair
Nunavut Undetermined
Ontario Fair
Prince Edward Island Fair
Quebec Fair
Saskatchewan Fair
Yukon Territory Undetermined

10-year predictions

In the next ten years, there will be more job opportunities than job applicants for this position. Due to a skills shortage, a few openings may not be filled.

Employment requirements

  • It is necessary to have a bachelor’s degree in mechanical engineering or a similar field of engineering.
  • A master’s or doctoral degree in a related engineering subject.
  • To approve engineering designs and reports and practice as a Professional Engineer, skilled engineers must be licensed by a provincial or territorial organization.
  • They are eligible for registration after graduating from an approved training program and completing three or four years of supervised engineering work experience, as well as passing a professional practice exam.

Professional license requirements

Before you can work in Canada you may need to get a professional license from a regulatory authority.

Location Job title Regulation Regulatory body
Alberta Mechanical Engineer Regulated Association of Professional Engineers and Geoscientists of Alberta
British Columbia Mechanical Engineer Regulated Engineers and Geoscientists of British Columbia
Manitoba Mechanical Engineer Regulated Engineers Geoscientists of Manitoba
New Brunswick Mechanical Engineer Regulated Association of Professional Engineers and Geoscientists of New Brunswick
Newfoundland and Labrador Mechanical Engineer Regulated Professional Engineers and Geoscientists of Newfoundland and Labrador
Northwest Territories Mechanical Engineer Regulated Northwest Territories and Nunavut Association of Professional Engineers and Geoscientists
Nova Scotia Mechanical Engineer Regulated Association of Professional Engineers of Nova Scotia
Nunavut Mechanical Engineer Regulated Northwest Territories and Nunavut Association of Professional Engineers and Geoscientists
Ontario Mechanical Engineer Regulated Professional Engineers Ontario
Prince Edward Island Mechanical Engineer Regulated Association of Professional Engineers of Prince Edward Island
Québec Mechanical Engineer Regulated Ordre des ingénieurs du Québec
Saskatchewan Mechanical Engineer Regulated Association of Professional Engineers and Geoscientists of Saskatchewan
Yukon Mechanical Engineer Regulated Engineers of Yukon

Responsibilities

  • Mechanisms, parts, and systems are studied for their viability, architecture, operation, and efficiency.
  • Component predictions, costs and scheduling, reporting, and design requirements for machinery and systems are all part of the planning and project management process.
  • Power plants, machinery, parts, tools, equipment, and fittings are all designed.
  • Mechanical structure and mechanism dynamics and vibration analysis
  • Supervising and testing the installation, modification, and commissioning of mechanical devices
  • Establish maintenance norms, schedules, and programs, and give crews with instructions for industrial maintenance.
  • Investigate mechanical problems or unexplained maintenance concerns.
  • Prepare contract documents and examine bidders for industrial construction or maintenance.

About author View all posts

Y-Axis

Leave a Reply

Your email address will not be published. Required fields are marked *

2 × one =